The Cobra Magnum™ Rear Loader
The New Way Cobra Magnum offers a high compaction body at a lighter weight than the competition. Add in a huge 3.55 yd³ hopper and a striking 21-23 second cycle time and the Cobra Magnum delivers a crushing bite to anything you throw at it.;)
- Weight: 14,880-16,550 lbs *
- Capacity: 20-32 yd³
- 21-23 Second Cycle Time
- Contact a Dealer »
- Product Inquiry »
- Product Flyer »
| General Specifications (standard) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | 20 RL |
25 RL |
32 RL |
||||||||
| Body Capacity | 20 yd³ |
25 yd³ |
32 yd³ |
||||||||
| Body Width (A) | 96" |
96" |
96" |
||||||||
| Body Length (B) | 251.5" |
289"‡ |
315.5" |
||||||||
| Body Height (C) | 99.5" |
99.5" |
99.5" |
||||||||
| Approx. Body Weight * (Empty & Exclusive of Options) |
14,880 lbs |
15,250 lbs |
16,550 lbs |
||||||||
| Hopper Capacity | 3.55 yd³ |
3.55 yd³ |
3.55 yd³ |
||||||||
| Hopper Opening Width | 80" |
80" |
80" |
||||||||
| Loading Sill Height | 3.5" below frame |
3.5" below frame |
3.5" below frame |
||||||||
| Hopper Cycle Time (sec) | 21-23 |
21-23 |
21-23 |
||||||||
‡ - Length measured depends on options ordered
* - Approximate Body Weight empty and exclusive of options
** - Any Chassis sent to Scranton Manufacturing with less than the minimum guideline requirements will not be mounted. (Chassis must be capable of carrying the net weight of the body plus the weight of the refuse collected.)
| US | Metric | ||
|---|---|---|---|
| Roof | 10 GA | 3.42 mm | 80K GR |
| Sides | 10 GA | 3.42 mm | 80K GR |
| Ejection Panel | 10 GA | 3.42 mm | 50K GR |
| Sweep Panel | 1/4" | 6.35 mm | 100K GR |
| Floor | 10 GA | 3.42 mm | 80-100K GR |
| Tailgate (upper) | 10 GA | 3.42 mm | 50K GR |
| Tailgate (lower) | 1/4" | 6.35 mm | 100K GR |
| Hopper Floor (back) | 1/4" | 6.35 mm | 100K GR |
| Slide Panel | 7 GA | 4.5 mm | 100K GR |
| US | Metric | |
|---|---|---|
| Oil Reservoir | 50-70 gal | 227-318 L |
| Oil Flow w/Std. Pum | 36 GPM | 135 LPM |
| Operating Pressure | 2,750 PSI | 18,961 KPA |
| Hydraulic Hoses | 4 to 1 Burst | |
| Return Filter | 10 micron | |
| Engine RPM | 1,000 - 1,200 NVM |
Standard Equipment
- Semi Automatic Cycling
- Auto Back Pack
- Accelerator Kit
- Turn Buckle Locks
- Back Up Alarm
- Light Bar
- All LED Lights
- Sight Gauge on Oil Tank
- Oil Pressure Gauge
- Chrome Rod Cylinders
- Side Access Door
- Driver Alert Buzzer
- Tailgate Ajar Indicator
- Bolt on Steps on Rear
- Prime Paint
- Rear Vision Camera System
- Talamar Extreme Hydraulic Fluid
Optional Equipment
- Special Lighting
- PTO & Pump
- Finish Paint-Imron 5000
- Container Lifts (commercial & residential)
- Body Scale System
- Auto Tailgate Locks
- Steel Upgrades
- Extended Warranties
